DINGLI AMWP8-1200 - Page 22

OPERATOR’S MANUAL with Maintenance Information
Pre-operation Inspection
17
Pre-operation Inspection
 Be sure that the operator’s manual are
complete, legible and in the storage
container located in the platform.
 Be sure that all decals are legible and in
place. See Decals section.
 Check for hydraulic oil leaks and proper
oil level. Add oil if needed. See
Maintenance section.
 Check for battery fluid leaks and proper
fluid level. Add distilled water if needed.
See Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts
and unauthorized modifications:
 Electrical components, wiring and
electrical cables
 Hydraulic hoses, fittings, cylinders
and manifolds
 Battery pack and connections
 Drive motors
 Rollers and slide blocks on masts
 Tires and wheels
 Lifting chains and idler wheels
 Mast and mast braces
 Limit switches, alarms and horn
 Nuts, bolts and other fasteners
 Platform entry gate and guard rail
 Alarms and beacons
 Platform extension
 Platform Control Panel
 Pothole guard
 Wire
Check entire machine for:
 Cracks in welds or structural
components
 Dents or damage to machine
 Be sure that all structural and other
critical components are present and
all associated fasteners and pins are
in right place and properly tightened.