OPERATOR’S MANUAL with Maintenance Information
Function Tests
23
53 Press and hold the function enable switch
on the control handle.
54 Move the control handle in the direction
indicated by the blue arrow, and then
move the control handle in the direction
indicated by the yellow arrow.
⊙ Result: The drive function should not work
in either direction.
55 Press and hold the function enable switch
on the control handle.
56 Depress the thumb rocker switch on top of
the control handle in the direction identified
by the blue and yellow arrow on the control
panel.
⊙ Result: The steer function should not work
in either direction.
57 Lower the platform and remove the 5x10
wood block.
To Next Page
Loading...
