OPERATOR’S MANUAL with Maintenance Information
Maintenance
40
A-2
Perform Pre-operation Inspection
Completing a Pre-operation Inspection is
essential to safe machine operation. The
Pre-operation Inspection is a visual inspection
performed by the operator prior to each work
shift. The inspection is designed to discover if
anything is apparently wrong with a machine
before the operator performs the function tests.
The Pre-operation Inspection also serves to
determine if routine maintenance procedures
are required.
Complete information to perform this
procedure is available in the appropriate
operator’s manual. Refer to the Operator’s
Manual on your machine.
A-3
Perform Function Tests
Completing the function tests is essential to
safe machine operation. Function tests are
designed to discover any malfunctions before
the machine is put into service. A
malfunctioning machine must never be used. If
malfunctions are discovered, the machine
must be tagged and removed from service.
Complete information to perform this
procedure is available in the appropriate
operator’s manual. Refer to the Operator’s
Manual on your machine.
To Next Page
Loading...
