DINGLI JCPT0607DCS - Page 36

OPERATOR’S MANUAL with Maintenance Information
Operating Instructions
31
Code
Trouble shooting
62
Machine Tilted Beyond Safe Limits Fault: If the machine is tilted, find a way to make
it level.
63
The platform touch the Anti-hand clamp position
64
Left Brake Coil Fault: Check the connections to the Coil’s terminals and make sure
they are tight. If so, check the coil itself to see if it is open or shorted.
65
Right Brake Coil Fault: Check the connections to the Coil’s terminals and make sure
they are tight. If so, check the coil itself to see if it is open or shorted.
66
Charge battery
69
Restart the power
90
TM1 over current
91
TM1 over current
95
Turning the traction motor
99
Bypass was enabled by human
101-115
Please contact manufacturers or replace ECU
201-231
Please contact manufacturers or replace TM1
For more information, please consult the appropriate Dingli Service Dept.