3
Setting Up Dio Node (Cont.)
1. Plug in the speaker to power.
You will see a white light start to blink on the back of the speaker.
This means the speaker is booting up.
2. Wait for the speaker light to start blinking red.
This means it is now ready to be set up on Wi-Fi.
4. You will see “SET UP NEW AIRPLAY SPEAKER...” listed on the
page. Click on the Dio speaker listed and follow the
on-screen instructions to set up and name your speaker.
And...done! Ta-da! Your speaker is now ready to play.
That was easy, right?
3. Go to your iPhone/iPad’s Wi-Fi settings.
Open the Settings app, then click on “Wi-Fi”.
To Next Page
Loading...