19
B. LATCH/UAS INSTALLATION
To improve safety and performance, this booster seat is equipped with a
lower anchorage system that allows secure attachment to a vehicle’s
lower anchor locations. DO NOT use LATCH/UAS if installation
interferes with vehicle seat belt.
IMPORTANT: When using booster seat in center seating position,
make sure it is does not rock from side-to-side, otherwise choose a
dierent seating position.
WARNING! Unsecured objects can become ying hazards and can
cause serious injury in an accident. If your vehicle is equipped with
lower anchors, Diono always recommends installation utilizing the
LATCH/UAS connectors with this booster seat.
1. Disengage LATCH/UAS connectors from storage slots and lay
booster seat on its side. While PRESSING the silver cam lock lever,
pull LATCH/UAS connectors away from the booster seat and
extend both straps. Do not overextend connector straps.
FIRST SETUP
To Next Page
Loading...
