30
USING THE SHOULDER BELT GUIDE STRAP
WARNING! When in backless mode, if the vehicle shoulder belt
does not correctly t the child, then the seat must be used with
the shoulder belt guide strap or with the backrest attached and
properly adjusted to t the child.
BACKLESS BOOSTER
1. Remove shoulder belt guide strap from
storage area underneath seat.
2. Position child correctly in seat, making
sure lap and shoulder belts are positioned
properly across child.
3. Attach the RED shoulder belt guide
strap onto the diagonal shoulder belt.
4. Adjust strap to correct length, so
that the RED guide is just above
shoulder. The vehicle seat belt must
not be touching the child’s neck and
lays properly over the shoulder and
collar bone.
To Next Page
Loading...
