25
3. Feed the shoulder belt portion of the
vehicle seat belt through the upper
belt guide.
IMPORTANT:
• When the shoulder belt is routed
through the upper belt guide, pull some
webbing out of the retractor. Slowly
release it to make sure the belt property
feeds back into the retractor. Do this
between each use.
• The vehicle shoulder belt should lay
over the shoulder and should NOT be
touching the child’s neck.
4. Fasten vehicle seat belt across child.
The lap portion of the seat belt should
rest within both lower belt guides. Make
sure the vehicle seat belt is not twisted
and lays at across child’s hips, torso
and shoulder. DO NOT lay belt
high over the child’s belly.
SECURING THE CHILD
To Next Page
Loading...
