DIP Grinders DKS-65 - General and Particular Safety Warnings; General Safety Instructions; Specific Usage Precautions

- 3 -
GENERAL WARNINGS
• Read this manual before using the appliance as it contains important
instructions for the safety, operation and maintenance of the appliance.
• Before plugging in the appliance, make sure that voltage and frequency
values of the power supply correspond to the rating plate.
• The wall socket must be fitted with an earth contact and a 10A fuse.
• Before performing any work on the appliance, including cleaning or
maintenance, disconnect it from the power supply.
• Turning off the appliance by using its master switch does not assure the same
conditions of safety.
• The manufacturer cannot be held responsible for bodily injury or property
damage if the above warnings are not respected and the warranty will be void.
PARTICULAR WARNINGS
• Do not tamper with the appliance, for maintenance or repair contact an
authorized service center.
• Do not pull the power cable in order to unplug the appliance from the socket.
• This appliance has been designed solely for grinding coffee beans.
• Place the appliance at minimum of 5 cm from the wall to allow proper
ventilation.
• Keep the appliance at a safe distance from water sources.
• Never leave the machine unintended, keep it out of the rich of children or
people with handicap.
• Do not switch on an appliance that looks damaged.
• Use only original accessories and parts.
• To avoid the danger of fire, never cover the appliance.
• Unplug the appliance from the mains when it is not in use.
• Let the appliance cool down before moving it.
• Be aware that the grinding blades may continue rotating for a short period of
time after the appliance is switched off.
• Do not let liquids of any kind come in contact with the internal or external
parts of the appliance.
• Never pour ground coffee in the hopper, the grinder is designed only for
coffee beans.
• Do not touch the appliance with damp or wet hands/feet.
• THE HOPPER MUST BE FASTENED TO THE GRINDER BY MEANS OF THE
RELEVANT SCREW which must be inserted in the threaded hole located on
the coffee grinding Adjustment disk (fig. 1).
• The manufacturer cannot be held responsible for bodily injury or property
damage if the above warnings are not respected and the warranty will be
void.
ATTENTION: Moving parts.