How to fix a blank display on my dipo INDUCTION Griddle?
If the display on your dipo INDUCTION Griddle is blank, first, ensure the unit is properly plugged in and that the breaker is on. Also, verify that voltage is present at the unit.
Why is my dipo INDUCTION Griddle on but not heating the pan?
If your dipo INDUCTION Griddle powers on but the pan isn't heating, make sure you are using a pot suitable for induction ranges and that the pot is placed in the center of the top plate.
What to do if my dipo INDUCTION Griddle stops heating or weakens?
If your dipo INDUCTION Griddle stops heating or its output weakens, try the following: * Check the surrounding temperature. * Ensure proper ventilation around the product. * Verify the ceramic top plate temperature is above 500F. * Confirm the pan is correctly placed. * Check the set timer value. * Make sure the 12-hour maximum run time hasn't been exceeded.
What does the E5 error mean on my dipo INDUCTION Griddle?
If your dipo INDUCTION Griddle displays an 'E5' error, this indicates the temperature sensor isn't correctly connected to the product. Check that the temperature sensor is properly connected.
How to fix E2, E3, or E7 error on dipo INDUCTION Griddle?
If your dipo INDUCTION Griddle displays 'E2', 'E3', or 'E7', unplug the unit or turn off the breaker for at least one minute. Then, plug it back in or turn the breaker back on and try again.
What to do if my dipo INDUCTION Griddle shows E4 or E6 error?
If your dipo INDUCTION Griddle displays 'E4' or 'E6', turn off and unplug the unit. Allow it to cool off completely, then plug it back in and try again.
General| Type | Induction Cooktop |
|---|---|
| Burner Quantity | 1 |
| Model Number | TCK60-E |
| Brand | Dipo |
| Number of Cooking Zones | 1 |
| Control Type | Touch Control |
| Product Type | Portable Cooktop |
| Power Supply | 220-240V, 50-60Hz |
| Safety Features | Overheat Protection, Child Lock |
To Next Page