DirectConnect DC4KHIR-1 - Receiver Panel Overview; Receiver Panel Layout; Receiver Port Functions

High Speed HDMI 4K 60 Hz
Single Cat5e/Cat6 Extender
DC4KHIR-1 PN: .42002
4
Receiver Panel
Number
Name
Function description
1
HDMI OUT
HDMI output port, connect to HDMI display device such as TV or
Projector with an HDMI cable.
2
CAT IN
Connect to CAT OUT port on the transmitter end with a CAT6
cable.
3
Power Indicator
Lamp (Green)
The lamp will illuminate when the receiver is powered on.
4
Data signal
Indicator Lamp
(Orange)
The lamp will illuminate when the transmitter and the receiver
have signal transmission.
5
SERVICE port
For firmware updated use.
6
IR IN
Connect to wideband IR Receiver cable. The IR signal will send to
the IR OUT port of the transmitter.
7
DC 12V
Plug DC 12V/1A power supply into the unit and connect the
adapter to an AC outlet.
(Note: The extender supports PoC function, it means that either
transmitter or receiver is powered supply by 12V/1A power
adapter, the other doesn’t need power supply.)