8 © 2001 Directed Electronics, Inc. Vista, CA
FEATURE 1 - LANGUAGE: Dipswitch 1 is used to select either English or Japanese as the language in which the
voice messages and programming instructions will be announced.
FEATURE 2 - MESSAGE TYPE: Dipswitch 2 is used to select either Viper or generic voice messages. For example,
when programmed for the Viper setting the system would announce “Viper disarmed”, while a system programmed
with the generic setting would announce, “System disarmed.”
FEATURE 3 - SIREN MONITORING: Dipswitch 3 is used to turn the siren monitoring feature on or off. In the on
setting, the H1/5 BROWN wire monitors the siren wire of the security system so that the Silent Mode feature can
be retained. In the off setting, the H1/5 BROWN wire will not be monitored, and the system will always gener-
ate the armed voice message and error messages. In the off setting, the Silent Mode feature cannot be utilized.
FEATURE 4 - REMOTE START RUNNING MESSAGE: Dipswitch 4 is used to select either a repeating or one-time
“Caution, Valet operating vehicle” message to warn anyone near the vehicle that the Valet feature is running the
car. In the on setting, the message will repeat once every 60 seconds after the vehicle has been remote started.
In the off setting, the message will only be generated once.
system feature descriptions
To Next Page
Loading...
Need help?
General
