Directed Electronics Rattler 259D - Page 5

2
© 2002 directed electronics, inc.
wwhhaatt iiss iinncclluuddeedd
➤ Control Module
➤ One Two-Button Transmitter
➤ 8-Pin Main H/1 Harness
➤ 6-Pin H/2 Secondary Harness
➤ Plug-in Status LED
➤ Relay Satellite Pack
➤ Shutdown Toggle Switch
➤ Plug-in Valet/Program Button
iinnssttaallllaattiioonn ttoooollss
➤ Digital Multi-Meter
➤ Drill
➤
9
/
32 and
5
/
16 Drill Bits
➤ Screwdrivers
(Phillips and Flathead)
➤ Wire Stripper
➤ Solder Iron
➤ Electrical Tape
➤ Pliers
➤ Crimping Tool
note: The installation tools required will vary depending
on your vehicle.