Need help?Do you have a question about the Directed Electronics READY REMOTE 24923 and is the answer not in the manual?
General| Type | Remote Starter |
|---|---|
| Number of Buttons | 5 |
| Remote Start | Yes |
| Keyless Entry | Yes |
| Trunk Release | Yes |
| Engine Immobilizer Bypass | Yes |
| Number of Remotes | 2 |
| Battery Type | CR2032 |
General safety guidelines and regulatory compliance information.
Specific wiring details for the 9-pin main harness, including factory alarm disarm and horn wire.
Wiring and testing instructions for the 6-pin heavy gauge relay harness, covering ignition and starter wires.
Wiring details for the 5-pin auxiliary harness, including tachometer and safety shutdown wires.
Explains various types of door lock systems and their interface methods.
Explains the importance and connection of the neutral safety switch for safety.
Step-by-step procedure to test the neutral safety switch functionality.
Explains how to interpret LED flashes to diagnose remote start failures.
Critical safety warnings and precautions for installation and operation.
Procedures to test critical safety shutdown circuits before final installation.
To Next Page