Directed Electronics AS-2371TW-FM User Manual

TWO-WAY FM LED AUTOMATIC/MANUAL
TRANSMISSION REMOTE STARTER
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required for successful communication.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user's authority to operate the equipment
Doc#: 110728 Rev:1.5 © 2011 - 2W-FM-LED-A/M-HD - - FcN - Canada
AS-2371TW-FM
User Guide
WARNING
It is the responsibility of the vehicle operator to ensure their
vehicle is parked in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
b) Automatic transmission
: When leaving the vehicle, it is the
user’s responsibility to ensure that the gearshift lever is in “Park” in
order to avoid accidents upon remote starting.
(Note: Make sure that the automatic vehicle cannot start in "Drive".)
2. It is the user's responsibility to ensure that the remote starter is
disabled or put into valet mode before servicing.
Designed & engineered in Canada

Directed Electronics AS-2371TW-FM Specifications

General

Brand	Directed Electronics
Model	AS-2371TW-FM
Category	Remote Starter
Language	English

Summary

General Safety Warnings

Vehicle Parking Responsibility

User's responsibility to ensure safe parking and proper gear selection for remote starting.

Servicing Safety Protocol

Ensures the remote starter is disabled or in valet mode before vehicle servicing.

Government Regulations and Compliance

FCC and Industry Canada Compliance

Details compliance with FCC Rules and Industry Canada Radio Standards Specification RSS 210.

Introduction to SmartStart™ System

System Overview and Features

Introduces the state-of-the-art remote car starter and its smartphone integration.

Using the Remote Control

2-Way LED Remote Functions

Explains the functions of the LOCK, UNLOCK, TRUNK, START/STOP, and AUX buttons on the 2-way remote.

1-Way Companion Remote Functions

Details the functions of the LOCK, UNLOCK, TRUNK, START/STOP, and AUX buttons on the 1-way remote.

Vehicle Presets

Heater Settings Recommendation

Recommends preset heater (blower motor) settings for optimal remote start.

Wipers, Radio & Headlights Settings

Advises ensuring wipers, radio, and headlights are OFF before remote starting.

Starter Kill System Operation

Arming and Disarming Starter Kill

Details procedures for arming and disarming the starter kill in Passive and Active modes.

Remote Starting Your Vehicle

Setting Vehicle to Ready Mode

Explains the steps to enable Ready Mode for manual transmission vehicles.

Remote Start Initiation

Details how to press the button to start and stop the engine remotely.

Driving Off Procedure

Guides the user on how to disarm the starter kill and take control of the vehicle.

Remote Starter Features

Remote Door Locks and Trunk Release

Explains how to lock/unlock doors and release the trunk using the remote.

Idle Mode Activation

Allows the engine to run while unattended. Covers automatic transmission.

Push-To-Start Idle Mode

Variant of Idle Mode specifically for Push-To-Start vehicles.

Valet Mode Activation and Deactivation

Details how to enter and exit Valet Mode using the key or transmitter.

Valet Mode Exit Procedure

Instructions to take the system out of Valet Mode using the key or transmitter.

Panic Mode Activation

Explains how to activate panic mode by pressing and holding the AUX button.

Quick Lockout™ Feature

Provides fast protection by locking doors in emergency situations.

Cold Weather Mode Entry (2-Way Remote)

Details how to enter Cold Weather Mode using a 2-way remote.

Cold Weather Mode Entry (1-Way Remote)

Details how to enter Cold Weather Mode using a 1-way remote.

Cold Weather Mode Exit and Verification

Instructions to exit and verify if the system is in Cold Weather Mode.

Extended Run Time Operation

Allows resetting the engine run time counter once per remote start.

Disable/Enable LED Flashing

Instructions to disable or enable the remote's LED flashing indication.

Constant Output Operation

Explains constant pulse for locking/unlocking doors and window control.

Advanced Features

Ignition-Controlled Door Locks

Doors automatically lock on ignition ON and unlock on ignition OFF.

Secure Lock Feature

Relocks doors after remote start to maintain security.

Safe Start Feature Explanation

Prevents accidental remote starts by requiring a double press of a button.

Swap Start Function (2-Way)

Alternative method to remote start using AUX and other buttons on 2-way remote.

Swap Start Function (1-Way)

Alternative method to remote start using AUX and other buttons on 1-way remote.

Engine Run Time Configuration

Details programmable engine run times for gas and diesel engines.

Turbo Mode for Automatic Transmission

Allows turbocharger to idle down after vehicle shutdown by remote for automatics.

Turbo Mode for Manual Transmission

Procedure to activate Turbo Mode for manual transmission vehicles.

Home Valet™ Mode Activation

Sets vehicle to a no-remote-start mode using the remote.

Home Valet™ Mode Deactivation

Procedure to take the vehicle out of Home Valet™ Mode.

AUX 1 Functions: Priority Door Unlock

Allows unlocking only the driver's door with a single press of the button.

AUX 1 Functions: Horn Confirmation

Enables horn confirmation for button presses and enables panic mode.

AUX 2 Activation

Explains how to activate AUX 2 using the AUX or Shift button.

Horn Timing Adjustment

Allows installer to configure the pulse duration for horn activation.

Multi-car Operation Control

Allows controlling two vehicles with the same remote starter.

OEM-Style Alarm Integration

Monitors doors, hood, and ignition, sounding the horn on intrusion.

Intrusion Codes via Horn Interpretation

The horn provides codes indicating the type of intrusion detected.

Vehicle Status and Troubleshooting

Vehicle Status Request Procedure

Allows checking vehicle status like door lock, modes, and remaining run time.

Status When Engine is Running

Shows LED indications for door status and run time when the engine is running.

Troubleshooting Poor Transmitting Range

Discusses factors affecting transmitter range and tips to improve it.