Directed Electronics AS-2371TW-FM - Using the Remote Control; 2-Way LED Remote Functions

P.4 User Guide
UsingtheRemoteControl
Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two
independent vehicles equipped with a remote starter (see Multi-car operation section on page-
15). The functions of the transmitter are as follows:
2-way LED remote
LOCK: Locks the doors and arms
the STARTER KILL (if installed).
(Image as reference
only)
UNLOCK: Unlocks the doors and
disarms the STARTER KILL (if
installed). Activates the AUX 1
output if Priority Door Access is
configured.
TRUNK: Opens the TRUNK or
activates the AUX 3 output.
Note: Trunk option must be
installed.
LED #1 LED #2
START/STOP: Remote starts or
stops the engine. Gets the system
into Cold Weather mode by
pressing the SHIFT button and
then pressing and holding the
START/STOP button for
3 seconds. Note: Icon may vary.
LED #3 LED #4
AUX
AUX: This button serves as a
second function button.
This button allows assigning
different functions to any of the
other four buttons.