18
© 2013 Directed. All rights reserved.
18
Advanced Commands: (Level 2)
Press and release the button two times first, before
pressing one of the following command buttons.
Sensor Bypass
Press and release
The parking lights flash each time this command is received to in-
dicate the Sensor bypass type. Two flashes indicates sensor Warn-
away zones are bypassed.
BYPASS WARN
, one beep and one fault
tone play to confirm. 3 flashes indicates sensor Warn-away and
Full Trigger zones are bypassed.
BYPASS FULL
, one beep and two
fault tone play to confirm. One flash indicates sensor bypass is Off,
BYPASS OFF
and one beep play to confirm..
Note
System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Remote Valet
Press and release
Enters (or if On, exits) Valet Mode. The
VALET
text and beeps (one
for On, two for Off) play to confirm and the System Status icons up-
date. See Valet Mode for more details
AUX 2
Press and release
AUX
Activates (or if On, deactivates) the Aux 2 output. The
AUX CHANNEL
text and On tones or Off tones play to confirm.
level 2
To Next Page
Loading...
Need help?
General
