70
Programming Your Remote Control
You may have already programmed your remote control during Guided Setup, but if you didn’t, or you
want to make changes, or you’ve acquired some new equipment, follow these instructions.
You can program the DIRECTV® R emote Control to operate your TV power, volume and mute,
additional equipment such as a DVD, VCR, stereo, or second TV or DIRECTV HD Receiver.
1) Press MENU to display the Menu.
2) Highlight Help & Settings and press SELECT.
3) Highlight Setup and press SELECT.
4) Press SELECT on Remote in the left menu.
5) Follow the onscreen instructions to program your remote for your TV or additional equipment
(AV1 and AV2).
Once your remote is programmed to work with your TV, the VOL and MUTE key control the TV
regardless of the slide switch position. If you would like to change the VOL and MUTE to work
with other audio equipment, such as a stereo, you can. When you program the remote for the audio
equipment, onscreen instructions will direct you on how to do this.
If you
programmed your
Remote Control
during Guided
Setup, you can
skip this section.
H21 User Guide.indb 70H21 User Guide.indb 70 9/19/07 9:32:31 AM9/19/07 9:32:31 AM
To Next Page
Loading...
Need help?
General
