18
SLIM
EN
6
5
DETAILED INSTRUCTIONS ON CONNECTING
THE POWER SUPPLY CABLES
In vehicles which do not have original power
connection in the hatch area.
1
Reassemble the interior air distribution panel in
the original position, tightening with torque 0.75
Nm±10%.
Caution: Take care to position the wiring to
ensure it does not interfere with the duct unit
adjustment with the base of the unit.
5
Secure the console with (4) 6/100x15 Allen
screws on the original boreholes.
Caution! This operation is carried out after
connecting the cabling.
6
To Next Page
Loading...
