To Next PageTo Next PageWhat to do if Dirt Devil POWER MAID M345 Steam Cleaner produces less steam?
If your Dirt Devil Steam Cleaner is producing less steam than before, it could be due to calcified steam channels or nozzles clogged with limescale. Decalcify the appliance. You can also clean the nozzles, for example, by using the cleaning needle.
What to do if Dirt Devil POWER MAID M345 Steam Cleaner operating light changes from green to red?
If the operating light on your Dirt Devil Steam Cleaner changes from green to red during operation, you may continue working. The appliance continues to heat up, unless too much water is escaping from the steam nozzle. If that happens, wait until the operating light illuminates green again.
Why Dirt Devil POWER MAID M345 Steam Cleaner operating light is not illuminated?
If the operating light on your Dirt Devil Steam Cleaner isn't on, it could be due to a couple of reasons: the power cord might not be properly plugged in, so ensure it is. Alternatively, the socket you're using might not be carrying current. Try testing the appliance on a socket you know is working.
What to do if Dirt Devil Steam Cleaner leaves spots after cleaning?
If your Dirt Devil Steam Cleaner is leaving spots on the surface after cleaning, it might be because you're focusing the steam jet on one area for too long. Avoid keeping the steam jet in one place for an extended period.
What to do if Dirt Devil POWER MAID M345 Steam Cleaner doesn't produce steam after 40 seconds?
If the operating light is on, but your Dirt Devil Steam Cleaner isn't producing steam after 40 seconds, it could be that the overheating protection device has tripped because the water tank is empty. Fill the water tank. Another possibility is that the water tank or heating elements are calcified, in this case decalcify the appliance.
General| Product Type | Steam Cleaner |
|---|---|
| Model | M345 |
| Brand | Dirt Devil |
| Power Source | Electric |
| Voltage | 120V |
| Wattage | 1500W |
| Cord Length | 20 ft |
