dirtdevil.com.au 4
OPERATION
Assembling your cylinder
WARNING: Before plugging the cord into the electrical socket, make sure the switch is in the
‘o’ position.
Insert the end of the hose into the
unit. Ensure the hose has clicked
into place.
Plug in and switch the unit on by
pressing the power button.
Slot the metal telescopic extension
tube and hose handle together. All
accessories can be tted to the
end of the metal telescopic
extension tube and hose handle.
Fully unwind the power cord.
A yellow mark on the cord indicates
the recommended cord length.
Do not exceed the cord beyond the
yellow mark.
To Next Page
Loading...
