Dirt Devil REBEL 3.0 - Cleaning the Pre-Motor Filter

Dirt Devil Service Line: AU: 1300 829 287
NZ: 0800 829 6957
MAINTENANCE
Cleaning the pre-motor lter
Hold the dirt container and twist
the lid anti-clockwise.
Tap excess dirt from the lter. Rinse under a tap and leave to dry for 24 hours.
IMPORTANT: Water temperature should not exceed 40°C when washing pre-motor lter.
IMPORTANT: Ensure lters are completely dry before inserting back into the vacuum cleaner.
Lift the lid to reveal the
pre-motor lter.
T
A
P
MAX
40˚C
Lift out the pre-motor lter.
24hr
24hr
IMPORTANT: It is very important that lters are kept clean to obtain maximum performance from your
vacuum cleaner. Not cleaning and not replacing your lters regularly can reduce the suction power and
cause overheating and permanent damage to the vacuum cleaner.