dirtdevil.com.au 8
MAINTENANCE
Cleaning the shroud
Cleaning the HEPA media post-motor lter
Hold the dirt container and twist
the lid anti-clockwise.
Post motor lter is located in the
right side wheel. Hold the centre
of the wheel and twist wheel
cover anti-clockwise.
Remove the inner separator from
the container.
Lift the lid to reveal the
pre-motor lter.
With the wheel cover o the
post-motor lter is easily removed.
Remove the cap from the
inner separator.
Lift out the pre-motor lter.
Dislodge any excess dirt by gently
tapping the inner separator upside
down above a bin.
Tap all excess dirt o the lter.
Do not wash.
TAP
To Next Page
Loading...
