HOW TO USE
TO USE: Slide the power switch to the ON position.
TO TURN UNIT OFF: Slide the power switch to the OFF position.
• Empty and clean the unit and filter after each use or after large pickups when the unit becomes full.
TO USE
ATTACHMENT
The crevice tool is permanently stored on board. It is located on the top of the dust cup for your convenience.
Press the crevice tool
release button.
1.
Flip crevice tool down to
line up with nozzle then
press up until secure in
place.
2.
To store crevice tool: Pull
down until loose. Flip crevice
tool up towards unit and press
until you feel it lock into place.
3.
TO STORE
DIRT CONTAINER & FILTER: REMOVAL & REMPLACEMENT
IMPORTANT: FOR BEST RESULTS, CLEAN THE FILTER AFTER EACH USE.
For filter replacement part # 3-088570-001, please call 1-800-321-1134.
Depress the dirt cup release
button and pull nozzle away
from unit.
1.
Hold nozzle over a waste-
basket. Grasp filter and gen-
tly pull out. For filter
replacements, call 1-800-
321-1134.
2.
Shake excess dirt and
debris out of dust cup.
Brush the dust and dirt off
the filter, or shake the filter
inside of the wastebasket.
IMPORTANT: DO NOT
WASH FILTER.
3.
Gently push filter back into
dust cup.
4.
To reattach dust cup: Align
bottom first and rotate nozzle
up, until it snaps into place.
5.