t Reflex Duplicator Manual
- 45 -
Each user has their own settings and hard drive partitions.
During this process, you will be prompted to enter a new
user name and user password for a new account.
- User name can consist of up to 8
alphanumeric letters or numbers.
- User password will consist of 4 numbers.
Press “ENT“ button to enter into this menu and press
“ESC“ button to go back to the main menu or cancel the
current selection.
3.
Edit User Info
This menu allows you to change the existing user
accountís name and password. During this process, you
will be asked to select the existing account and then you
will be prompted to enter the new user name and new
user password for this account.
- User “Admin“ is the administrative account,
you can NOT change the user name for this
account, but you will be able to change the
password for this account.
- User name consists of up to 8 alphanumeric
letters or numbers.
-User password will consist of 4 numbers.
Press “ENT“ button to enter into this menu and press
“ESC“ button to go back to the main menu or cancel the
current selection.
4.
Delete User
anage Accounts
3. Edit User Info
t Reflex Duplicator Manual
- 46 -
This menu allows you to delete the existing user account.
During this process, you will be asked to select the
existing account to be removed.
- User “Admin“ is the administrative account;
you can NOT delete this account.
Press “ENT“ button to enter into this menu and press
“ESC“ button to go back to the main menu or cancel the
current selection.
5.
Password on Bootup
This menu allows you to enable/disable account
management upon boot up. During this process, you will
be asked to select “ON“ or “OFF“ (enable/disable).
Press “ENT“ button to enter into this menu and press
“ESC“ button to go back to the main menu or cancel the
current selection.
To Next Page
Loading...