t Reflex Duplicator Manual
- 13 -
Once the duplication run is completed, the good copies
will be ejected and you shall see the following screen:
O
Next, refill more blank media to continue making more copies, or
you can press “ESC“ to terminate your project and go back to the
main menu.
If you enable the counter and specified a counter value for
your project and your project is completed, you shall see
the following screen:
If you see above message, you can press “ENT“ to go
back to main menu.
If you enabled the counter and the number of
discs you have inserted is more than what you
requested, you will receive a message regarding
you have inserted more discs than what you need.
You can continue to copy or you can eject the
extras.
21 Disc Copie
aiting for Blanks
- “PASS 7” indicates that you’ve
just made 7 successful copies.
- “FAIL 0” indicates that you
have no failure in this run.
- “7” indicates that you’ve
successfully copied 7 discs.
t Reflex Duplicator Manual
- 14 -
If you happen to have any failed discs (bad copy),
the failed disc(s) will not be ejected automatically.
You need to manually eject them and throw them
away if they are write once recordable disc(s).
NOTES
To Next Page
Loading...