Dish Network 4K Joey - Linking Your 4 K Joey to Your Hopper; Select Hopper, Link, and Confirm Status

9.
Linking Your 4K Joey to Your Hopper
a.
Using your remote control, highlight
the Hopper you would like to link to
and press the SELECT button. Once you
select your Hopper, use your remote
control to highlight "Next" and then
press the SELECT button.
b.
Wait while your 4K Joey links to your
Hopper. If your 4K Joey cannot link to
your Hopper, check both receivers'
cable connections. Then, using your
remote control, highlight "Retry" and
then press the SELECT button on your
remote control.
c.
Once "Linked" appears in the "Link Status"
eld and "Strong" appears in the "Quality"
eld, use your remote control to highlight
"Next" and then press the SELECT button
on your remote control.