Chapter 3
Page 40
Using the System
TV/Video Button
If you connect the receiver using its back panel TV ANTENNA/CABLE IN
and
CHANNEL 3-4 connections, use this button to switch the receiver
CHANNEL 3-4 coaxcial output between the satellite programming and another
video signal such as cable or over-the-air TV antenna connected to the
receiver’s
TV ANTENNA/CABLE IN.
Arrow Buttons
• Change channels while watching TV - Press the UP and DOWN ARROW
buttons.
• Open the
Browse Banner - Press the RIGHT ARROW button.
•Show
Themes - Press the LEFT ARROW button.
• Move around within the
Program Guide, menus, and Browse Banner -
Press the UP, DOWN, LEFT, and RIGHT ARROW buttons.
• Delete - Press the LEFT ARROW button to delete characters while using
Search. See page 72 for instructions.
Select Button
Press the SELECT button to select the option you have highlighted in a menu.
Recall Button
Press the RECALL button to go back to the last satellite receiver channel you
were watching. Press it again to switch between the last two satellite receiver
channels you were watching.
Info Button
• Program information - Press the INFO button for more information when
To Next Page
Loading...
Need help?
General
