Chapter 3
Page 90
Using the System
Volume Button
Press this button to raise (+) or lower (-) the TV sound volume.
Up and Down Arrow Buttons
Use the UP and DOWN ARROW buttons to change channels on the TV.
Note: These buttons do not change the channels on the TV if the remote control
has been set to operate in limited mode.
Select Button
The SELECT button works as the ENTER button for a TV.
Recall Button
Press the RECALL button to go back to the last TV channel you watched. Press
it again to switch between the last two TV channels you watched.
Number Buttons
Use the NUMBER PAD buttons to directly enter a different channel number.
Note: These buttons do not change the channels on the TV if the remote control
has been set to operate in limited mode.
To Next Page
Loading...
