Dish Network 54.0 User Manual

Remote Control
Quick Start Guide
Model 54.0

Dish Network 54.0 Specifications

General

Brand	Dish Network
Model	54.0
Category	Remote Control
Language	English

Summary

Turn On Your Remote

Remove the back cover

Push latch upward and remove the PULL tab to open the remote back cover.

Replace the back cover

Securely replace the back cover after inserting batteries.

Open receiver panel and press SYS INFO

Open the DISH receiver front panel and press the SYS INFO button.

Press SAT button for pairing

Press the SAT button on the remote's side to pair with the receiver.

Pair Your Remote

Press home button twice

Select Settings and Remote Control

Select TV and TV Pairing Wizard

Voice Control Operations

Press and hold voice button

Say command

Release voice button

Personalize Your Remote

Press and hold diamond button

Select button action

Select OK

Locate Your Remote

Open receiver front panel

Press LOCATE REMOTE button

Press the LOCATE REMOTE button on the receiver to find the remote.

Regulatory and Safety Information

FCC Compliance

Device complies with Part 15 of FCC Rules; subject to two conditions.

Interference

Device must accept received interference and not cause harmful interference.

Safety Instructions

Keep safety in mind; follow warnings on device and in instructions.

Heat Precautions

Do NOT place device near heat sources like radiators or stoves.

Cleaning and Use

Use damp cloth for cleaning; remove batteries if unused for long periods.

Servicing

Refer servicing to qualified personnel; do not attempt to service yourself.