Need help?Do you have a question about the Dish Network 40.0 and is the answer not in the manual?
General| Brand | Dish Network |
|---|---|
| Model | 40.0 |
| Category | Remote Control |
| Language | English |
Follow device warnings and avoid heat sources.
Use damp cloth for cleaning; remove batteries when not in use.
Refer servicing to qualified personnel; opening voids warranty.
Steps to confirm and install a specific remote key.
Instructions for correctly inserting 4 AAA batteries.
Start System Wizard via '0' or MENU.
Follow on-screen steps to backup/restore settings.
Ensure the antenna is correctly installed.
Press SAT, wait for tone, and test remote operation.
Control power, inputs, menus, and navigate lists.
Adjust volume, mute, view guide, and search programs.
Access DVR, shortcuts, PIP, and OnDemand services.
Manage TV inputs, menus, audio, and volume.
Navigate channels, select options, and use Picture-In-Picture.
Control DVD player power, inputs, and playback.
Record, navigate menus, and enter channels/numbers.
Press DVR twice to view recorded programs.
Play, pause, stop, and record programs.
Reverse and fast-forward programs at various speeds.
Skip forward/backward or play in slow motion.
Reverse or advance recordings frame-by-frame.
Shortcuts for DVR functions when navigating guides.
Shortcuts for menu, clicks, settings, and setup.
Choose TV, DVD, or AUX and enter a four-digit code.
Additional steps for programming auxiliary devices.
Confirm code and test remote operation with the device.
Start automatic search for device codes.
Filter scan results by device brand.
Test code by turning device off; retry if unsuccessful.
Verify code works and save settings.
Access current remote settings via MENU.
Check brand name and record codes for reference.
Lock remote to power, Mute, and Volume functions.
Return remote to full functionality.
Activate the remote finding feature.
Listen for tones to find the misplaced remote.
Connect and position the UHF-2G antenna correctly.
Relocate receiver and antenna to minimize interference.
Set remote to control audio receiver/amplifier volume.
Verify volume adjustment works in AUX mode.
Set remote to control TV volume.
Verify volume adjustment works in SAT mode.
Understand how to learn commands and supported modes.
Position remotes and activate learning mode.
Start learning commands for specific buttons.
Send, receive, and verify learned commands.
Save learned commands and return to normal operation.
Basic steps to solve remote problems.
Address non-functional remote or wrong actions.
Resolve LED flashing and unresponsive remote issues.
Address remote performance and picture quality problems.
Fix mute/volume issues and receiver self-activation.
Resolve remote failures and range problems.
Troubleshoot issues with the Picture-In-Picture button.
Legal details on warranty coverage and limitations.
Warranty coverage for DISH Network accessories.
How to get help from DISH Network.
Device compliance with FCC rules.
How to correct radio frequency interference.
Space to log remote address and cable inputs.
Space to log TV, DVD, VCR, and AUX codes.
To Next Page
