Dish Network 40.0 - Control Amplifier Volume; Configure Remote for Amplifier Volume; Test Amplifier Volume Control

19
Control Amplier Volume
When the remote control is set up to operate your
TV, the MUTE and VOLUME buttons adjust your
TV volume when in SAT mode. To use the remote
to adjust the volume of a remote-controllable audio
receiver or amplier instead of adjusting the TV’s
volume setting, use the steps on this page.
Press MENU, select
Settings tile, and then
select Remote Control.
Select Volume.
Under Control Volume
For: use the down arrow
key to highlight the AUX
option.
Highlight and select the on-
screen option to Save this
setting.
1
2
3
4
5
6
7
Make sure the remote controls the amplier’s
volume in other modes:
Press SAT.
Press the plus (+) and
minus (-) sides of the
VOLUME button.
Your tuner/amplier’s volume
changes, and the AUX mode
button lights.