To Next PageTo Next Page
Need help?Do you have a question about the Dish Network DISH Pro Plus and is the answer not in the manual?
General| Type | Satellite Dish Antenna |
|---|---|
| Frequency Range | 12.2-12.7 GHz |
| Power Passing | Yes |
| Frequency Band | Ku band |
| LNB Type | DISH Pro Plus LNB |
| Compatibility | DISH Network receivers |
| Input Connectors | F-connector |
| Output Connectors | F-connector |
| DC Voltage | 13V/18V |
| Operating Temperature | -40°C to +60°C |
Describes connecting two tuners for two orbital locations using DISH Pro.
Details configurations for four tuners across two orbital locations.
Illustrates setup for six tuners across two orbital locations with DP34 switches.
Explains using a DP Plus Twin for two orbital locations with a DP Plus Separator.
Covers connecting legacy receivers to two orbital locations with DISH Pro.
Details configurations for up to four tuners across three orbital locations.
Shows setup for up to twelve tuners with three orbital locations and DP34 switches.
Illustrates configurations for up to 24 tuners with three orbital locations and DP34 switches.
Explains setup for up to two tuners across three orbital locations with DP21 switches.
Describes using a DP Plus Twin for three orbital locations with a DP Plus Separator.
Covers connecting legacy receivers to three orbital locations with DISH Pro.
Details connectivity for the DP Plus 44 Switch in four orbital location setups.
Shows configurations for up to 24 tuners with four orbital locations and DP Plus 44 switches.
Illustrates setups for up to 48 tuners with four orbital locations and DP Plus 44 switches.
Discusses compatibility and limitations of DISH Pro LNBFs and switches.
Explains how to connect legacy receivers using DISH Pro Adapters.
Details connecting DISH Pro Plus receivers with DP Plus Separators.
Covers requirements for single-cable, dual-tuner installations with DP Plus components.
Lists required materials for DISH Pro and DISH Pro Plus installations.
