44
Overlapping Timers
OVERLAPPING TIMERS
If you try to create event timers for overlapping programs, the receiver displays a screen with the
dates and times of both programs. You must delete or edit one of the timers.
TIPS
• It's very important to leave the receiver enabled to receive updates. By doing this, the receiver
can have the latest software and Program Guide information.
• If your VCR does not respond to the receiver’s commands, see if you accidentally left the
protective film on the receiver’s front panel.
Chapter 8 381.fm Page 44 Thursday, May 21, 2009 6:11 PM
To Next Page
Loading...
