54
Controlling Other Components
Switching Between TV and Device Volume Control
When you set up the remote to control a TV, the mute and volume buttons control the TV volume.
However, if you want to use the AUX mode to control a tuner or amplifier and the device has a
volume setting, you can set up the remote to control the device’s volume instead of the TV volume.
Be sure to set up the remote to control a device in AUX mode before using this feature.
Controlling the Amplifier’s Volume
1 Press and hold AUX for four seconds, and then let go of it. AUX will blink.
2 Press POUND (#).
3 Press the plus (+) side of VOLUME.
4 Press ZERO (0).
5 Press POUND (#). AUX flashes three times.
Now make sure the remote controls the amplifier’s volume:
6 Press SAT.
7 Press the plus (+) and minus (-) sides of VOLUME. The device’s volume changes and AUX lights
instead of TV.
Chapter 9 381.fm Page 54 Thursday, May 21, 2009 6:13 PM
To Next Page
Loading...
