Ditch Witch 1030 User Manual

12 1030/1230 - CONTROLS
CONTROL CONSOLE DESCRIPTIONS
12 1030/1230 - CONTROLS
CONTROL CONSOLE DESCRIPTIONS
Throttle (Black)
This lever controls engine speed.
Increasing engine speed also
increases digging chain speed.
• Push down to speed engine.
• Pull up to slow engine.
Power Switch
This two-position switch controls power to the machine.
• Turn clockwise to turn power on. In this position, engine will
start when rope start is pulled.
• Turn counterclockwise to stop engine.
ic0128h.eps
Throttle (Black)
This lever controls engine speed.
Increasing engine speed also
increases digging chain speed.
• Push down to speed engine.
• Pull up to slow engine.
Power Switch
This two-position switch controls power to the machine.
• Turn clockwise to turn power on. In this position, engine will
start when rope start is pulled.
• Turn counterclockwise to stop engine.
ic0128h.eps

Ditch Witch 1030 Specifications

General

Fuel	Diesel
Transmission	Hydrostatic
Digging Depth	48 in (121.9 cm)
Trenching Width	6 inches
Drive System	4WD