Ditch Witch 1030 - Engine Controls Descriptions

14 1030/1230 - CONTROLS
ENGINE CONTROLS DESCRIPTIONS
14 1030/1230 - CONTROLS
ENGINE CONTROLS DESCRIPTIONS
ENGINE CONTROLS DESCRIPTIONS
Fuel Shut-off Valves
Two valves separate fuel reservoir from engine.
• Close when transporting unit to or from jobsite.
• Open before starting engine.
Choke
This valve regulates air/fuel mixture. Close valve to help start cold
engine.
Pull Start
Cranks engine for starting.
• Ensure that power switch is on and fuel shut-off valves are
open.
• Pull to start engine.
If engine does not start after three pulls, turn power switch off and
check for fuel blockage or electrical system problems.
ENGINE CONTROLS DESCRIPTIONS
Fuel Shut-off Valves
Two valves separate fuel reservoir from engine.
• Close when transporting unit to or from jobsite.
• Open before starting engine.
Choke
This valve regulates air/fuel mixture. Close valve to help start cold
engine.
Pull Start
Cranks engine for starting.
• Ensure that power switch is on and fuel shut-off valves are
open.
• Pull to start engine.
If engine does not start after three pulls, turn power switch off and
check for fuel blockage or electrical system problems.