Ditch Witch 1030 User Manual

1030/1230 - OPERATION 45
TRENCHING
1030/1230 - OPERATION 45
TRENCHING
7. Slowly lower digging boom to desired trench depth.
Incorrect procedures can result in
death, injury, or property damage. Learn to use
equipment correctly.
NOTICES:
• Machine may move when chain starts to dig. Allow 3’ (1 m)
between end of chain and obstacle.
• Digging chain on top side of boom can catch on root or rock,
forcing handlebar down suddenly. Stand back from console
and hold handlebar loosley.
8. When desired trench depth is reached, move throttle to full
open.
9. Move speed/direction control to reverse. Trencher will move
toward you.
Trenching movement is toward you.
om0045c
7. Slowly lower digging boom to desired trench depth.
Incorrect procedures can result in
death, injury, or property damage. Learn to use
equipment correctly.
NOTICES:
• Machine may move when chain starts to dig. Allow 3’ (1 m)
between end of chain and obstacle.
• Digging chain on top side of boom can catch on root or rock,
forcing handlebar down suddenly. Stand back from console
and hold handlebar loosley.
8. When desired trench depth is reached, move throttle to full
open.
9. Move speed/direction control to reverse. Trencher will move
toward you.
Trenching movement is toward you.
om0045c

Ditch Witch 1030 Specifications

General

Fuel	Diesel
Transmission	Hydrostatic
Digging Depth	48 in (121.9 cm)
Trenching Width	6 inches
Drive System	4WD