Service - 102 410sx Operator’s Manual
500 Hour
Plow
Change Plow Vibrator Oil
Change plow vibrator oil every 500 hours.
To change:
1. Remove drain plug (1) located just below sight
glass (2) on gearbox cover.
2. Drain oil and replace plug.
3. Add MPL at fill (3) until cold oil is halfway up
sight glass (2).
NOTICE: Fill capacity is 2.4 pt (1 L). Do not
overfill.
IMPORTANT: Do not drain oil from plow vibrator
when hot. Let vibrator cool before removing
drain plug.
To Next Page
Loading...
