Service - 90 410sx Operator’s Manual
10 Hour
Check Hydraulic Hoses
Check hydraulic hoses for leaks every 10 hours.
Check Tire Pressures
Check tire pressures before each use.
Fluid or air pressure could pierce skin and cause injury or death. Stay
away. Escaping pressurized fluid can cause injury or pierce skin and poison.
To help avoid injury:
• Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
Lower, block, or support any raised component with a hoist. Cover connection with heavy cloth and
loosen connector nut slightly to relieve residual pressure. Catch all fluid in a container.
• Before using system, check that all connections are tight and all lines are undamaged.
• Use a piece of cardboard or wood, rather than hands, to search for leaks. Fluid leaks can be hard to
detect.
• Wear protective clothing, including gloves and eye protection.
If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.
Tire option Max. pressure
26 x 12.00-12 4-ply bar lug 20 psi (1.4 bar)
DUALS ONLY: 23 x 10.5-12
6-ply bar lug
20 psi (1.4 bar)
To Next Page
Loading...
