410sx Operator’s Manual Service - 93
10 Hour
To adjust roller boom with grease cylinder:
1. With boom horizontal, measure distance from
bottom of boom to chain (2). When properly
adjusted, distance should be 1.5-2.0” (40-50
mm).
2. To tighten chain, remove plug and pump MPG
into cylinder (1). To relieve chain tension,
loosen plug on grease cylinder.
Pressurized fluid or air could pierce skin and cause injury or death. Stay
away.
To help avoid injury: Service digging boom grease cylinder only while standing on opposite side of
boom. Wear gloves and safety glasses, and cover fitting with cloth when relieving pressure in cylinder.
To Next Page
Loading...
