Service - 60 FX20 Operator’s Manual
10 Hour
CMW
Vacuum System
Check Engine Oil Level
Check engine oil at dipstick (2) before operation
and every 10 hours thereafter. Check with unit on
level surface and at least 15 minutes after
stopping engine. Add GEO at fill (1) as necessary
to keep oil level at highest line on dipstick.
Check Engine Air Filter
Check air filter every 10 hours. Change filter
element as needed.
Check Blower Oil Level
With frame level, check blower oil level at sight
glass (2) every 10 hours. Add SGL at breather (1)
as necessary to maintain oil level at halfway point
on sight glass (2). Do not overfill.
To Next Page
Loading...
Need help?
General
