FX20 Operator’s Manual Service - 69
100 Hour
CMW
100 Hour
Vacuum System
Change Water Pump Oil
Change oil after the first 25 hours of operation
and every 100 hours thereafter. Change oil more
frequently if working in dusty conditions.
• Drain at drain plug (2) while oil is warm.
• Refill with NDO at fill (1) until oil is at halfway
mark on dipstick.
Check Blower Drive Components
Check drive components every 100 hours. Adjust
and tighten if necessary.
Location Task Notes
Vacuum
System
Change water pump oil NDO
Check blower drive components
Change engine oil GEO
Debris Tank Check tank deflector
To Next Page
Loading...
Need help?
General
