DITEC CROSS7E User Manual

IP2012
rev. 2008-10-01
CROSS7E / 8E / 14E - E1A
QUICK REFERENCE
1. ELECTRICAL CONNECTIONS FOR STANDARD INSTALLATION
Before installing the product, carefully read the instructions.
XEL5 XEL2 XEL2
RX
01
4x0,5 mm²
4x0,5 mm²
4x0,5 mm²
C
NO NC
RG58 (max 10 m)
230~
2x1,5 mm²
GOL4-GOL4C
LAMP
TX
01
ANT
E1A
L
N
N
CUWV
12
12 11
0
011
1 568941
GOL4-GOL4C
3x1,5 mm²
Power supply

DITEC CROSS7E Specifications

General

Usage Type	Residential, Commercial
Gate Type	Swing
Max Gate Leaf Length	5 m
Power Supply	230 V AC
Motor Voltage	24 V DC
Operating Temperature	-20°C to +55°C
Protection Class	IP44
Encoder	Yes
Motor Type	Electromechanical
Protection Rating	IP44
Safety Features	Obstacle Detection

Summary

Electrical Connections for Standard Installation

Usage with Stop Limit Switch

DIP2=OFF Limit Switch Configuration

Configures opening and closing limit switches when DIP2 is set to OFF.

DIP2=ON Limit Switch Configuration

Configures opening and closing limit switches when DIP2 is set to ON.

E1A Standard Setting and DIP Configuration

Radio Enabling Procedure

Push PRG Button for Radio Enabling

First step in the radio enabling process: press the PRG button.

Push CH Button for Radio Enabling

Second step in radio enabling: press the CH button.

Automatic Closing Setting

TC Time Setting Disabled

Disables the automatic closing time setting (TC time).

TC Time Setting Enabled

Enables the automatic closing time setting (TC time).