Need help?Do you have a question about the DITEC OBBI3BH and is the answer not in the manual?
Details installer obligations under the Machinery Directive 2006/42/EC for gate automation.
Guidelines for product service life, applications, and performance characteristics.
Lists and illustrates components and part numbers for geared motors used in gate automation.
Ensures gate structure is robust and hinges are lubricated before installation begins.
Details measurements and procedures for installing the geared motor unit onto the gate.
Instructions for adjusting magnetic limit switches for correct opening and closing of the automation.
Essential safety information for users regarding safe installation, use, and maintenance of the gate.
Procedures for manually opening or closing the gate in case of fault or power loss.
Details installer obligations under the Machinery Directive 2006/42/EC for gate automation.
Guidelines for product service life, applications, and performance characteristics.
Lists and illustrates components and part numbers for geared motors used in gate automation.
Ensures gate structure is robust and hinges are lubricated before installation begins.
Details measurements and procedures for installing the geared motor unit onto the gate.
Instructions for adjusting magnetic limit switches for correct opening and closing of the automation.
Essential safety information for users regarding safe installation, use, and maintenance of the gate.
Procedures for manually opening or closing the gate in case of fault or power loss.
General| Model | OBBI3BH |
|---|---|
| Category | Gate Opener |
| Power supply | 230 V AC |
| Motor voltage | 24 V DC |
| Max. power | 300 W |
| Max. thrust | 3000 N |
| Operating temperature | -20°C to +55°C |
| Maximum Gate Width | 5 m |
| Safety Features | Obstacle detection |
To Next Page
