DITEC CROSS3E-73R - User Manual

IP2006
rev. 2008-08-04
CROSS3E/5EH/7EH - 73R
QUICK REFERENCE
1. ELECTRICAL CONNECTIONS FOR STANDARD INSTALLATION
Before installing the product, carefully read the instructions.
XEL5 XEL2
TX
XEL2
RX
01
4x0,5 mm²
3x1,5 mm²
ANT
4x0,5 mm²
4x0,5 mm²
01
C
NO NC
Power supply
RG58 (max 10 m)
14
0
2x1,5 mm²
CROSS3E
CROSS5EH CROSS7EH
73R
14C
NO
13
12 011
1 1 568920 41
GOL4-GOL4C
LAMPH
F1
LN

Summary

Electrical Connections for Standard Installation

Limit Switches Connection for CROSS5 EH - CROSS7 EH Only (Optional)

Usage Without Limit Switches

DIP2=OFF Configuration

Sets VA opening and VC closing speed settings when DIP2 is OFF.

DIP2=ON Configuration

Sets VA opening and VC closing speed settings when DIP2 is ON.

Usage With Stop Limit Switches (Optional)

DIP2=OFF Limit Switch Configuration

Configures opening/closing limit switches and speed settings with DIP2 OFF.

DIP2=ON Limit Switch Configuration

Configures opening/closing limit switches and speed settings with DIP2 ON.

73 R Standard Setting

DIP Switch Settings and Modes

Details DIP switch configurations for left/right opening and radio modes.

Radio Enabling Procedure

Automatic Closing Setting

TC Time Setting

Describes enabling or disabling the TC time setting for automatic closing.

DITEC CROSS3E-73R Specifications