Do you have a question about the DITEC ENTREMATIC SMART RESET and is the answer not in the manual?
| Brand | DITEC |
|---|---|
| Model | ENTREMATIC SMART RESET |
| Category | Gate Opener |
| Language | English |
Instructions for professional personnel on safe installation and adherence to regulations.
General safety warnings for users of the vertical-roll door.
Technical specifications for the 48E three-phase control panel.
Technical specifications for the 47E inverter control panel.
List and diagram of all product components.
List of components included in the product packaging.
Verifying installation opening dimensions and structural integrity.
Installing vertical support columns and ensuring perpendicularity.
Mounting the rolling shaft and its components to the uprights.
Mounting and connecting the K22 gearmotor to the shaft.
Fixing the SLE to the sliding guide and connecting it.
Inserting and positioning the curtain into the guides.
Mounting and connecting safety photocells.
Inserting and connecting pre-wired cables to the control panel housing.
Cable layout and positioning for control panel, motor, and security.
Wiring and connecting safety photocells as per diagram.
Detailed input/output connections for the 48E electronic control panel.
Explanation of indicators, dip-switches, and buttons for the 48E panel.
Detailed input/output connections for the 47E electronic control panel.
Explanation of trimmers, dip-switches, and LEDs for the 47E panel.
Adjusting the limit switches for door open/close points.
Adjusting the obstacle detection sensitivity of the SLE.
Adjusting the curtain tension and guide alignment.
Common problems, their causes, and verification steps.
Recommended intervals for replacing parts during preventive maintenance.
Explanation of the function of different control buttons.
Procedure for manually raising the curtain during power failure.
Information on intended use, service life, and operating conditions.
Manufacturer's declaration of compliance with EC directives and standards.
Loading...