DIVIMATH HOZERO HDZero - To Change Channel; To Change Band; Sources

7
- E1 - E8
- F1 - F8
- R1 - R8
- L1 - L8
To Change Channel
F
F
Press & hold
To Change Band
F
F
Sources
HDZero Monitor supports two signal sources: RF In and Line In.
For RF In:
- HDZero Monitor will automatically switch between RF Analog and RF HDZero until the rf signal is
locked.
- When the RF analog signal is locked, NTSC/PAL will be automatically detected.
- When the RF analog signal is locked, the VI/AO interface will output the audio from Analog RF.
For Line In:
- When the line in signal is locked, NTSC/PAL will be automatically detected.