Need help?Do you have a question about the DivioTec NBR123P and is the answer not in the manual?
Provides a general introduction to the NBR123P camera model and its key features.
Details the camera's cable connection, including the RJ45 connector and reset button.
Step-by-step guide for physically mounting the camera on a wall or ceiling surface.
Explains how to access the camera's settings via web browser or CAM-FINDER software.
Guides users through downloading and installing the CAM-FINDER utility for camera management.
Details the operations and interface of the CAM-FINDER software for camera discovery and basic management.
Describes the main components and functions within the CAM-FINDER application interface.
Step-by-step instructions for logging into the camera's interface using a web browser.
General guidance on navigating and modifying camera settings through its web interface.
Explains the layout and structure of the camera's comprehensive configuration menu.
Detailed settings for video streams, including codec, resolution, frame rate, and bit rate.
Configuration options for adjusting camera exposure, AE mode, and exposure time.
How to set up day/night modes, IR control, and IR cut control for optimal imaging.
Adjustments for image orientation, sharpness, saturation, brightness, and contrast.
Configuring specific areas within the video feed to prioritize for higher image quality.
Settings to mask specific areas of the video stream for privacy protection.
Customizing the display of camera name, date, and time on the video stream.
Configuration of essential network parameters like IP address, subnet mask, and system ports.
Configuration options for the RTMP streaming protocol and URL.
Enabling and configuring FTP access for file transfer from the camera.
Setting the SSL mode for secure network communication (http/https).
Enabling and managing secure shell (SSH) access to the camera.
Configuration of the 802.1x standard for network authentication.
Setup for Simple Network Management Protocol (SNMP) for network monitoring.
Defining firewall rules to filter network traffic to and from the camera.
Configuration for integrating the camera with an LDAP server for user authentication.
Configuring Dynamic DNS service for remote access to the camera via a hostname.
Configuring Real-Time Streaming Protocol (RTSP) unicast and multicast streams.
Configuration related to the GB28181 standard for video surveillance interoperability.
Adjusting the camera's date, time, and time zone for accurate logging and operation.
Procedures for firmware updates, camera reboots, and factory resets.
Creating, managing, and assigning permissions to user accounts for camera access.
Setting up and scheduling alarm triggers based on detected events.
Setting up motion detection zones, sensitivity, and schedules for event triggering.
Configuring the camera to detect and alert on tampering or sabotage attempts.
Setting up object detection methods like line counting and zone counting for event analysis.
Configuring event triggers for uploading data via FTP to a remote server.
Configuring email alerts for various camera events and specifying recipient details.
Setting up network storage for event recordings and snapshots.
Configuring event triggers for external devices connected via relay outputs.
Configuring event recording and scheduling to an SD card.
General| Brand | DivioTec |
|---|---|
| Model | NBR123P |
| Category | Outdoor Camera |
| Language | English |
To Next Page