to. Hold the two buttons for about 1 second; the note LEDs will flash to let you know when the
copy has been performed.
• The copy always goes from the FIRST -> SECOND button you press!
• You can’t copy songs to sequences or sequences to songs
Clearing a Song or Sequence
All the songs and sequences in the sequencer always exist, so generally if you want to wipe out
an existing song or sequence you can just modify them or program something new over the top
of them. If you do want to “clear” a memory, however, you can. Clearing a sequence sets all
the steps to the lowest note. Clearing a song sets all the steps to sequence 1.
To do this, first make sure the keyboard display is in SONG/SEQUENCE SELECT mode. Press
and hold the song or sequence you want to clear, then press and hold the RESET button. Hold
the buttons for about 1 second; the note LEDs will flash to let you know that the song or
sequence has been cleared.
Internal Clock
The internal clock works pretty much like before (see v1 section), but more speed choices have
been added and they have been more heavily concentrated in the “useful” range. Also, we
know what actual BPMs the speeds are now!
10 BPM 120 BPM 200 BPM 400 BPM
25 BPM 130 BPM 210 BPM 500 BPM
50 BPM 140 BPM 220 BPM 600 BPM
70 BPM 150 BPM 230 BPM 700 BPM
80 BPM 160 BPM 240 BPM 1000 BPM
90 BPM 170 BPM 250 BPM 2000 BPM
100 BPM 180 BPM 275 BPM 4000 BPM
110 BPM 190 BPM 300 BPM 8000 BPM
To Next Page
Loading...